Electric Throttle with Reverse and 3 speed Switch for Scooter GoKart eATV DIY

Description

Throttle with Reverse Switch and 3 Speed Switch
compatible with the Brushed and Brushless Speed Controllers that we sell
Brand new with warranty.
This Throttle needs a speed controller box in order to function. The speed controller box must have inputs for reverse and cruise control.
___________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________
Throttle
red = positive (+) 5V
black = GND (-)
white = (speed) signal
F-R switch
is a (NO-normally off) rocker type switch
yellow = (F) forward gear
(when switch is in the (F) position the switch is off (not making contact)
brown = (R) reverse gear
(when switch is in the (R) position the switch is on (making contact)
3 Speed switch
(Switch will connect either 2 cables from the available 3 at any time)
Freely test with your controller to obtain the desired result.
NOTE: This is for controllers that have a 3 cable input for 3 speed control
NOTE: This can also be used as a switch for lights, horn, signal, etc
* Alternate uses
The F-R switch could instead be used as an On/Off switch (to control the speed controller on vehicles without a reverse function) When in the (F) position the speed controller would be off & when (switched) to the (R) position the speed controller would be On. (energized)
…& the Cruise control button could be used for a horn.
We also sell other electric scooter parts and mini Bikes
Most orders ship same day from our warehouse
Warranty: 12 months from purchase date. We will only replace motors that do not work out of the box.  We test all motors before shipping. We will not replace burnt out motors.