Lighting Fixture Loaded Truss with Dimmer and Console Package

Description

For sale is a
Drop Frame Pre Rig Loaded Truss with Dimmer and Console Package
Kit  includes:
5x 10 foot trusses loaded with  8 par 64 fixtures, 2 soca panel mount connectors   feeding 12    L5-20 circuit per truss
4x 5 foot trusses unloaded
2x 10 foot trusses unloaded
1x ETC Sensor Touring Rack 48K x 2.4K with hot patch
8x ETC Source 4 Junior Zooms 25-50 degrees  L5-20 connectors, C-clamp, safety and 575 bulb
8x Strand 6” Fresnelite  L5-20 connectors, C-clamp, safety  and 575 bulb
1x Jands Event Plus 48/96 Lighting Console with case
1x 250’ 5 pin xlr dmx cable
6x 96’ 19 pin soca cables
2x 75’ 19 pin soca  cables
2x 50’ 19 pin soca cables
1x Martin Magnum 2500 Hazer
2x 5-wire 4/0 camlock to camlock 50’ cables
Grade 8 bolts and washers for connection
Buyer is responsible for all shipping charges.
Maintained by trained professionals.
Please let us know if you have any questions.
Thanks for Looking!
Manufacturer  Pete’s Lights (Performance Lighting). Description below
This  kit consist  of  5 loaded 10’ trusses  each with 8 par 64 lights and has 2 soca inputs  feeding 12 L5-20 panel  mount  connectors. You can add 4 other fixtures which are available on each loaded truss.  4 empty 5’ trusses and 2 empty 10’ trusses complete the package.  This system can be deployed  as a downstage truss  with  2 loaded 10’ , one 10’ empty  in middle  ( use circuits in loaded truss for leko’s or other  fixtures)  and  two 5’ trusses for the ends.  The upstage truss can be three loaded 10’ truss with another 12 extra available L5-20 panel mount connectors.  8 ETC Source 4 juniors’ fixtures and 8 Strand 6” Fresnel fixtures can be loaded on any truss.  A ETC Sensor Touring rack 48K by 2.4 per channel is the dimmer and rounding out the package is a Jands Event Plus 48/96 lighting console ( we have others available too)  Hazer is a Martin Magnum 2500. System comes with all cabling and is has bulbs
Made by Petes Lights (Performance Lighting). The internal bars are extruded aluminum I-beam style with Twelve (12) L5-20 outlets and two 19pin socapex. They are so strong because of their design. They use a special quick clamp (included) to hold the fixture to the bar. This also allows the fixtures to glide along anywhere on the bar and then lock down in position. You may hang fixtures from either side of these bars (top/bottom). Are wired as 6 circuit using standard 19pin socapex, Lots of flexibility. Bars are just shy of 10 feet long. The internal bars were made to fit into 10 feet Petes Lights prerig box truss.
The truss can travel 5 high stacked if need be . The fixture bar pivots and drops once you fly it off ground by simple pull pins.    There is also room to have drop down bars at back of truss to put in other fixtures