Stator For Ski-Doo Tundra 280 R 1998 1999 2000 2001 2002 2003 2004 2005 280R

Description

Free
shipping in USA
2 year
warranty
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Stator for Ski-Doo Tundra R 1998-2005
KEY FEATURES
Brand new aftermarket stator
Direct replacement to your original unit
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part
All products shipped are tested
Plug-and-play, direct fit, easy installation
DESCRIPTION
WARNING :Ski-Doo Tundra R 1999-2005 models ; RMS010-105937 stator has a different visual configuration than the OEM equipment, but works perfectly and exactly as a replacement part to your OEM stator.
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
Please note :
You will need to use the OEM connector for the three alternator wires and follow the OEM color codes.
Brand new aftermarket stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included
Back Plate included
All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Vehicle models fitment
Ski-doo Tundra 280 R Carb F/C -- 1998-2000, 2002-2005
OEM part replacement
420887657
420886608
Specifications
Dimensions:
Interior diameter: 43 mm
Exterior diameter: 110 mm
Thickness: 32 mm
Length of wires clamp to plug: 500 mm
Other specifications:
Number of wires: 6
Number of plugs: 1
Number of pins: 6
Number of poles: 12
Wire to wire resistance :
Alternator: Yellow between each yellow = 0.4 ohms +-20%
Alternator to ground = O.L
Source: Red to black = 8 ohms +-20%
instructions
Before installing your new stator
Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulatorrectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Item Delivery
Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.
Customer service
Part request
About us
About seller page
Add seller to favorite