-40%
Stator For Yamaha Venture 600 Mountain Max 600 1997 1998 1999
$ 105.07
- Description
- Size Guide
Description
Freeshipping in USA
2 year
warranty
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Stator for Yamaha Mountain Max 600 Venture 600 1997-1999
 
KEY FEATURES
 
Brand new stator direct replacement
Highest grade lamination materials
Highest grade copper windings resistant to 200 degrees celsius
All products shipped are tested
DESCRIPTION
 
Battery condition is extremely important. No stator can work correctly with a bad or weak battery.
Always fully charge your battery before performing any charging system tests or replacing parts.
If there is any doubt, have the battery load tested or replaced.
Brand new stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included
Connector included
Rubber grommet included
All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Vehicle models fitment
 
Yamaha Mountain Max 600 -- 1997-1999
Yamaha Venture 600 -- 1997-1998
OEM part replacement
 
8CW-85510-00-00
Specifications
 
Dimensions :
Interior diameter : 42mm
Exterior diameter : 103mm
Thickness : 14mm
Length of wires stator to grommet : 75mm
Length of wires grommet to plug : 200mm
Length of pickup coil's wire to grommet : 70mm
Other specifications :
Number of wires : 10
Number of plugs : 2
Number of pins : 10
Wire to wire resistance :
Alternator : Yellow to Yellow/Black = 0.4ohms +/-20%
Pick up : White/Red to White/Green = 210ohms +/- 20%
Source : Blue/Red to Brown = 250ohms +/-20%
Other : White to White/Black = 0.2ohms +/-20%
instructions
 
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010??.
Item Delivery
 
Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.
Customer service
Part request
About us
About seller page
Add seller to favorite